The deep processing of oil residues conjunction with shales
Abstract
The results of studies on the development of a new process of thermal cracking of tar oil as a slurry with crushed oil shale to obtain components of motor fuels. The results suggest doubtless advantages of the process before the industrial of thermo cracking, since the single-stage processing of raw materials in relatively in the mild conditions (5 MPa, 425ºC, volumetric feed rate 1.0 h-1) is achieved deep destruction of tar oil (the yield petrol fraction with a bp amounts to up to 180ºC - ~12 mass % of middle distillates with a bp 180-360ºC – 43-44 mass %, of raw material for catalytic cracking of a bp 360-520ºC – ~15-16%, based on the initial tar oil). Formed like coke products and raw materials contained in V and Ni is postponed on the mineral part of slate and removed from the reaction zone with the liquid products of the process.
References
1. Susuki S. Utilization of heavy oil - Thermal cracking of vacuum residues by Eureva Process // Chem. Equip. and Eng. Review, 1978. – №2. – P. 30.
2. Нефедов Б.К. Углубленная переработка нефтяных остатков как стратегическое направление развития нефтеперерабатывающей промышленности России в 2010-2020 гг. // Катализ в промышленности, 2010. – №4, – С. 39-50.
3. Газимзянов Н.Р. IX Конференция по технолоогиям нефтепереработки России и стран СНГ // Катализ в промышленности, 2010. – №1,. – С. 78-80.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.