Electrodeposition of cobalt-molybdenum alloys from electrolytes with different ratios of metals

  • Alexander Sokolov al-Farabi Kazakh National University
  • Oleg Halkin al-Farabi Kazakh National University
  • Kamila Baydagulova al-Farabi Kazakh National University
  • Mikhail Nauryzbaev al-Farabi Kazakh National University
Keywords: cobalt-molybdenum alloys, electrodeposition

Abstract

The influence of the quantitative ratio of molybdenum and cobalt in the electrolyte on the process of electrolyticcodeposition of these metals in the alloy was investigated. It was established that changing the concentrations of the components greatly influences the ratio of the ionic forms of the metals in the solution. The optimum ratio of molybdate and cobalt ions for this series of experiments was 0.11 and the coatings deposited with good quality and a high current efficiency.

Author Biographies

Alexander Sokolov, al-Farabi Kazakh National University

Center of Physical Chemical Methods of Research and Analysis

Oleg Halkin, al-Farabi Kazakh National University
Center of Physical Chemical Methods of Research and Analysis
Kamila Baydagulova, al-Farabi Kazakh National University
Center of Physical Chemical Methods of Research and Analysis
Mikhail Nauryzbaev, al-Farabi Kazakh National University
Center of Physical Chemical Methods of Research and Analysis

References

Subramania A., Priya A.R. Sathiya, Muralidharan V.S. Technical Communication Electrocatalytic cobalt–molybdenum alloy deposits. Int. J. Hydrogen Energy, 2007, 32(14). P. 2843-2847.

Kuznecov V.V., Kalinkina A.A., Pshenichkina T.V., Balabaev V.V. Jelektrokataliticheskie svojstva osadkov splava kobal’t- molibden v reakcii vydelenija vodoroda. Jelektrohimija, 2008, 44(12). P. 1449-1457.

Prohorova E.E., Morozova N.V., Pavlov M.R., Kudrjavcev V.N. Osazhdenie splava Ni-Mo iz jelektrolitov, soderzhashhih molibden v promezhutochnyh stepenjah okislenija. Uspehi v himii i him. Tehnologii, 2006, 20(9). P.102-104.

Sidel’nikova S.P., Volodina G.F., Grabko D.Z., Dikusar A.I. Jelektrohimicheskoe poluchenie So-Mo pokrytij iz citratnyh rastvorov, soderzhashhih JeDTA: sostav, struktura, mikromehanicheskie svojstva. Jelektron.obrab.mater, 2007, 6. P. 20 25.

Yoo1 Y. R., Cho H. H., Jang S. G., Lee K. Y., Son H. Y., Kim J. G., Kim Y. S. Effect of Co content on the corrosion of performance stainless steels in simulated biosolutions. Key Engineering Materials, 2007, 342-343. P. 585-588.

Wendt H., Imarsio G. J Appl Electrochem, 1988, 181.

Divisek J. J Electroanal Chem, 1986, 214. P. 615.

Kita H. J Electrochem Soc, 1966. 113. P. 1095.

Chassaing E., Quang K.Vu, Wiart R. J Appl Electrochem, 1989, 19. P. 839.
Published
2013-09-14
How to Cite
Sokolov, A., Halkin, O., Baydagulova, K., & Nauryzbaev, M. (2013). Electrodeposition of cobalt-molybdenum alloys from electrolytes with different ratios of metals. Chemical Bulletin of Kazakh National University, 72(4), 118-124. https://doi.org/https://doi.org/10.15328/chemb_2013_4118-124