Obtaining of ferro–tungsten under pressure from raw materials with the low maintenance of tungsten and a tungsten breakage

  • N. Golovchenko Al–Farabi Kazakh national university; Institute of problems of burning, Almaty
  • G. Ksandopulo Al–Farabi Kazakh national university; Institute of problems of burning, Almaty
  • S. Aknazarov Al–Farabi Kazakh national university; Institute of problems of burning, Almaty

Abstract

On the basis of the analysis of references about influence of pressure on course metal–thermal processes and of works Open Company "Флога" on obtaining of ferromolybdenum and ferrotitanium the obtaining process of reception of ferrotungsten in crucibles under the pressure has been chosen, allowing at the expense of arising pressure to suppress disorder of a reacting mix and to reduce losses of the basic material on evaporation

References

1. Подергин В.А. Металлургические системы. М.: Металлургия, 1992, C.189.
2. Беляев А.Ф., Комкова Л.Д. // ЖФХ. 1950. – Т.34, – Вып.11. – С.1302–1311.
3. ISSN 0967–0912, Steel in Translation, 2008, Vol. 38, No. 6, pp. 470–474. © Allerton Press, Inc., 2008. S.M. Nekhamin, 2008, published in ―Stal’,‖ 2008, No. 6, P.43–47.
4. Плинер Ю.Л., Сучильников С.И. К вопросу о факторах, определяющих температуру внепечной алюминотермической плавки. – М.: Черная металлургия, 1961, № 1.
5.Мержанов А.Г., Юхвид В.И., Боровинская И.П. Саморастространяющийся високотемпературный синтез чистых тугоплавких неорганических соединений. // Доклад АН СССР. – т. 225, № 1, 1980, С.120–124.
Published
2011-03-30
How to Cite
Golovchenko, N., Ksandopulo, G., & Aknazarov, S. (2011). Obtaining of ferro–tungsten under pressure from raw materials with the low maintenance of tungsten and a tungsten breakage. Chemical Bulletin of Kazakh National University, 61(1), 129-135. Retrieved from https://chemistry.kz/bulletin/index.php/kaznu/article/view/866