Preparation of acrylonitrile butadiene styrene fibers by pulse electrospinning
Abstract
The paper represents the results on the preparation of polymer fibers of acrylonitrile butadiene styrene (ABS) with the addition of iron as a modifying additives by pulse electrospinning. The virtue of the method of pulse electrospinning in comparison with classical electrospinning is to obtain fibers with a controlled length. To study the morphology of the fibers obtained samples were used the optical and scanning electron microscopy. To prove the presence of iron inside the fibers methods of elemental analysis and electron paramagnetic resonance were used. The technique and optimal conditions for obtaining fibers have been determined. The effect of technological parameters, concentrations of polymer solutions and modifying additives on the structure and morphology of the fibers were shown.
References
1 (2013) Nanofibers. Overview of achievements. Available at www.newchemistry.ru.
2 (2013) Microfiber - new perspectives nonwovens industry. Available at www.newchemistry.ru.
3 Matveev AT, Afanasov IM (2010) Preparation of Nanofibers by Electrospinning. Textbook for students of "Composite nanomaterials" specialty [Poluchenie nanovolokon metodom elektroformovaniya. Uchebnoe posobie dlya studentov po spetsialnosti “Kompozitsionnyie nanomaterialyi”]. Moscow, Russia. P.83.
4 Quintero F, Mann AB, Pou J, Lusquiños F, Riveiro A (2011) Applied Physics Letters 90:2-8. http://dx.doi.org/10.1063/1.2722202
5 Rina B (2010) Design of an IGBT-Based Pulsed Power Supply for Non-continuous-mode Electrospinning. Industry Applications Society Annual Meeting (IAS), 2010 IEEE. Waterloo, Ontario, Canada. P.8-20. http://dx.doi.org/10.1109/IAS.2010.5615285
6 Santana E, Kemell M (2009) Nanotechnology 20:2-10. http://dx.doi.org/10.1088/0957-4484/20/3/035602
7 Ramakrishna S, Fujihara К, Teo WE, Lim TC (2005) An Introduction to Electrospinning and Nanofibers. World Scientific Publishing Co, Singapore. P.2-10. ISBN 978-981-256-415-3
8 Filatov YN. (1997) Electrospinning fibrous materials [Electroformovaniye voloknistykh materialov], Edited by Kirichenko VN. Oil and Gas, Moscow, Russia. P.12-89.
9 Huang Y, Zhang Z, Kotaki M (2003) Compos Sci Technol 63:2223-2253. http://dx.doi.org/10.1016/S0266-3538(03)00178-7
10 Graeser М (2007) Advanced Materials 19:20-29. http://dx.doi.org/10.1002/adma.200700849
11 Aliyev YT, Dabynov B, Mansurov ZA (2013) Development of pulse elestrospinning setup and getting micron length of fiber. Abstracts of the International Conference "Electrospinning, Principles, Possibilities and Practice", London, UK. P.3.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.