Simulation of activational grinding for rhombic sulfur particles in a disintegrator (pinned disc mill)

  • Farit Hisamutdinovich Urakaev V.S. Sobolev Institute of Geology and Mineralogy SB RAS, Novosibirsk
  • Ismail Aleksandrovich Massalimov Bashkortostan State University, Ufa, Bashkortostan
  • Talgat Sungatullovich Yusupov V.S. Sobolev Institute of Geology and Mineralogy SB RAS, Novosibirsk
  • Bolat Uralbekov al-Farabi Kazakh National University
  • Batukhan Burkhanovich Tatykaev al-Farabi Kazakh National University
  • Perizat Asylbekovna Galiyeva al-Farabi Kazakh National University
  • Tlek Aitmuhanovich Ketegenov al-Farabi Kazakh National University
  • Mukhambetkali Myrzabaevich Burkitbayev al-Farabi Kazakh National University
DOI: https://doi.org/10.15328/cb780
Keywords: disintegrator, sulphur, mechanical activation, kinematics and dynamics, simulation

Abstract

Based on the theoretical studies, complete picture of a mechanical processing of sulfur in the disintegrator is given. Kinematic and dynamic characteristics of elastic and inelastic collisions of particles of processed rhombic sulfur with rows of disintegrator fingers are calculated. Based on the analysis of the obtained dependency of the rotation frequency of the rotors offers, advices on selecting optimal conditions for activation milling of α-sulfur in the disintegrator are given. These results can be partially used in the processing of sulfur and in other types of shock grinding devices, in particular, jet mills. 

References

1   Yusupov TS (2016) J Min Sci+ 52:143-150. (In Russian)

2   Yusupov TS, Baksheeva II, Rostovtsev VI (2015) J Min Sci+ 51:182-188. (In Russian)

3   Yusupov TS, Urakaev FKh, Isupov VP (2015) J Min Sci+ 51:161-168. (In Russian)

4   Pravdina MKh (2005) Transfer processes in the granular layer [Protsessyi perenosa v zernistom sloe]. IT SO RAN, Novosibirsk, Russia. (In Russian). ISBN 5-89017-028-7

5   Shevchenko VS, Laptev YuV, Kolonin GR, Shestakova RD, Petrushin EI, Savintsev YuP, Yusupov TS, Urakaev FKh (2007) Chemistry for Sustainable Development 15:215-223. (In Russian). http://www.sibran.ru/journals/issue.php?ID=119864&ARTICLE_ID=127294

6   Laptev YuV, Shevchenko VS, Urakaev FKh (2009) Hydrometallurgy 98:201-205. http://dx.doi.org/10.1016/j.hydromet.2009.06.002

7   Urakaev FKh, Ketegenov TA, Uralbekov BM, Burkitbayev MM (2015) Chemical Bulletin of Kazakh National University 1:52-62. (In Russian). http://dx.doi.org/10.15328/cb577

8   Urakaev FKh, Tatykaev BB, Burkitbayev MM, Bakhadur AM, Uralbekov BM (2016) Colloid J+ 78:525-532. (In Russian). http://dx.doi.org/10.7868/S0023291216040194

9   Urakaev FKh, Burkitbayev MM, Tatykaev BB, Uralbekov BM (2014) Chemical Bulletin of Kazakh National University 2:53-59. (In Russian). http://dx.doi.org/10.15328/chemb_2014_253-59

10 Urakaev FKh, Bulavchenko AI, Uralbekov BM, Massalimov IA, Tatykaev BB, Bolatov AK, Zharlykasimova DN, Burkitbayev MM (2016) Colloid J+ 78:210-219. http://dx.doi.org/10.1134/S1061933X16020150

11 Massalimov IA, Khusainov AN, Zainitdinova RM, Musavirova LR, Zaripova LR, Mustafin AG (2014) Russ J Appl Chem+ 87:700-708. http://dx.doi.org/10.1134/S1070427214060068

12 Massalimov IA, Shainurova AR, Khusainov AN, Mustafin AG (2012) Russ J Appl Chem+  85:1832-1837. (In Russian). http://dx.doi.org/10.1134/S1070427212120075

13 Massalimov IA, Abdrakipova LF, Khusainov AN, Mustafin AG (2009) Russ J Appl Chem+  82:2087-2092. (In Russian). http://dx.doi.org/10.1134/S1070427209120027

14 Massalimov I, Medvedev Yu, Urakaev F, Ahmed ISA, Burkitbayev M, Uralbekov B (2016) American-Eurasian Journal of Agricultural and Environmental Sciences 16:652-662. http://dx.doi.org/10.5829/idosi.aejaes.2016.16.4.12902

15 Massalimov IA, Yanakhmetov MR, Chuykin AE, Mustafin AG (2013) Study of Civil Engineering and Architecture 2:19-24.

16 Bowden FP, Persson PA (1961) P Roy Soc Lond A Mat 260:433-458. http://dx.doi.org/10.1098/rspa.1961.0044

17 Kleis IR, Uuémyis KhKh (1986) The Wear Resistance of Elements of Impact Action Grinders [Iznosostoykost' elementov izmel'chiteley udarnogo deystviya]. Mashinostroenie, Moscow, Russia. (In Russian)

18 Urakaev FKh, Boldyrev VV (2000) Powder Technol 107:197-206. http://dx.doi.org/10.1016/S0032-5910(99)00200-4

19 Urakaev FKh (2007) Phys Chem Miner 34:351-361. http://dx.doi.org/10.1007/s00269-007-0153-y

20 Planiol R (1962) European Symposium on Size Reduction [Trudyi evropeyskogo soveschaniya po izmelcheniyu]. Stroyizdat, Moscow, Russia. (In Russian)

21 Urakaev FKh, Chumachenko YuV, Shevchenko VS, Taranova IV (1987) Disintegrator Technology [Dezintegratornaya tehnologiya]. Nauchno-proizvodstvennoe ob'edinenie "Dezintegrator", Tallinn, USSR. (In Russian)

22 Goldsmith W (1965) Impact [Udar]. Gosstroyizdat, Moscow, Russia. (In Russian)

23 Panovko YG (1977) Introduction to Mechanical Shock [Vvedenie v teoriyu mehanicheskogo udara]. Nauka, Moscow, USSR. (In Russian)

24 Routh EJ (1983) Dynamics of a System of Rigid Bodies. In 2 Volumes [Dinamika sistemyi tverdyih tel. V 2 tomah]. Nauka, Moscow, USSR. (In Russian)

25 Urakaev FKh (2010) High-Energy Ball Milling: Mechanochemical Processing of Nanopowders. Woodhead Publishing Limited, Oxford, UK. ISBN: 9781845695316

26 Anderson OL (1965) Physical Acoustics [Fizicheskaya akustika]. Mir, Moscow, USSR. (In Russian) ISBN: 9780123956699

27 Urakaev FKh (2013) Combust Sci Technol 185:1281-1294. http://dx.doi.org/10.1080/00102202.2013.783028

28 Urakaev FKh (2005) Mendeleev Commun 15:106-111. http://dx.doi.org/10.1070/MC2005v015n03ABEH001956

29 Sheludyak YE, Kashporov LY, Malinin LA, Tsalka VN (1992) Thermal Properties for Combustible Systems Components [Teplofizicheskie svoystva komponentov goryuchih sistem. Spravochnik]. NPO “ITEI”, Moscow, Russia. (In Russian)

30 Urakaev FKh, Boldyrev VV (2000) Powder Technol 107:93-107.  http://dx.doi.org/10.1016/S0032-5910(99)00175-8

31 Kapitonov AM, Red'kin VE (2013) Physical and Mechanical Properties of Composite Materials. Elastic Properties [Fiziko-mehanicheskie svoystva kompozitsionnyih materialov. Uprugie svoystva]. SFU, Krasnoyarsk, Russia. (In Russian) ISBN: 9785763827507

32 Lykov AV (1967) Theory of Heat Conduction [Teoriya teploprovodnosti]. Vysshaya Shkola, Moscow, USSR. (In Russian)

33 Batuev GS, Golubkov YuV, Efremov AK, Fedosov AA (1969) Engineering Research Methods of Impact Processes [Inzhenernyie metodyi issledovaniya udarnyih protsessov]. Mashinostroenie, Moscow, USSR. (In Russian)

34 Urusovskaya AA (1988) Modern Crystallography IV: Physical Properties of Crystals [Sovremennaya kristallografiya. Tom 4: Fizicheskie svoystva kristallov]. Nauka, Moscow, USSR. (In Russian)

35 Gyulai Z (1954) Z Phys 138:317-321. http://dx.doi.org/10.1007/BF01340676

Published
2016-12-30
How to Cite
Urakaev, F., Massalimov, I., Yusupov, T., Uralbekov, B., Tatykaev, B., Galiyeva, P., Ketegenov, T., & Burkitbayev, M. (2016). Simulation of activational grinding for rhombic sulfur particles in a disintegrator (pinned disc mill). Chemical Bulletin of Kazakh National University, 83(3-4), 10-20. https://doi.org/https://doi.org/10.15328/cb780
Issue
Vol 83 No 3-4 (2016): Chemical Bulletin of Kazakh National University
Section
Inorganic Chemistry
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-NC-ND 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.